| P.T
Bag is one of the most important component of Positive
Plate of Lead Acid Storage Battery and plays vital role
for its performance. So taking the above aspects into
consideration, KETEX takes special care during manufacture
of Pluri Tubular Bags. |
|
| While
designing Pluri Tubular Bag we have taken into consideration
the particle size of Battery Grade active material of
94% Oxide content which varies about 53 micron.
Sometimes the diameter of the particle is as low as 35
micron. |
|
| While
identifing the raw material and optimisation of process
parameters, we have considered the hazardous nature of
chemical reaction, such as electro chemical oxidation,
continuous exposure to sulphuric acid of 1.3 Sp.Gr at
700C etc. |
|
| Special
weaving mechanism, improved coating technique and better
fibre engineering takes care of change of the pressure
caused due to change of the volume by 90% in the positive
plate and 160% in the negative one of active material
due to change of its molecular weight from 273 to 303
and viceversa during utilisation period of battery, and
also can achieve maximum utilisation of active material
through Pluri Tubular Bag. |
|
|
STANDARD PRODUCTION
|
|
|
|
|
1
MAIN CHARACTERISTICS
|
|
| 1.1
Easy filling of powder or paste by hand or by machine
because of semirigid structure . |
| 1.2
High porosity greater absorbancy of the fabric wall itself. |
| 1.3
The fabric is impregnated with Battery Grade Modified
Acrylic resin of KETEX make. |
| 1.4
Weight per Linear meter of single tubing depending on
style : 6.3g to 7.1g. |
| 1.5
Electrical Resistance :0.25 ohm/cm2 |
| 1.6
Weight loss after 24 hrs at 600C in 20% Dichromate
solution.: 0.5% |
1.7
Impurity realeased after 3 hrs reflux.
| Chlorine |
:
Nil |
| Organic
Matter |
:
Nil
|
| Metalics |
:
Nil |
|
|
| 2
DIMENSIONS OF PLURI TUBULAR BAG OFFERED |
|
2.1
Standard internal diameters(tolerance 0.0 mm to 0.5 mm)
| ID |
PITCH |
| 6.00mm |
7.0
mm |
| 7.24mm |
8.4
mm |
| 8.00mm |
9.2
mm |
| 8.40mm |
9.5
mm |
| 10.00mm |
11.0
mm |
|
| 2.2
Width(tolerance± 2 mm) |
:as
requested |
| 2.3
Tube pitch(tolerance ± 2 mm) |
:as
requested |
| 2.4
Number of tubes/bag |
:upto
75 |
| 2.5
Maximum height of bag(tolerance + 0.5mm) |
:1040
mm |
| 2.6
Lateral finish |
:T.&C. |
|
| Important
notice to purchase:We receive the right to introduce
changes within the framewor of furthur technical development.We
do not accept any obligations or liabilities in respect
to this information. |
|
|
|
|
